Programmable Timer Function Daily And Weekly; Flow Diagram Timer Function - ETATRON D.S. eOne MF Notice D'installation, Emploi Et Entretien

PROGRAMMABLE TIMER FUNCTION DAILY AND WEEKLY

The TIMER settings menu is present in the configurations VFT-T VFT-ST, MF-T and ST-T. The Timer menu function
allows you to manage the operating status of the metering pump over all the set functions. The timer is structured in such a
way that you can have 16 start cycles in a day (Pump On) and Stop (Pump not operating). It is also possible to manage 16
cycles of start and stop for each day of the week. The following selections can be made:
DISABLE TIMER
DAILY TIMER
WEEKLY TIMER

Flow diagram TIMER function

OPERATING MODE
88
ENGLISH
The timer is deactivated.
By enabling this selection, the user can choose 16 cycles of start and stop throughout the day.
By enabling this selection, the user can choose 16 cycles of start and stop, over every single day of
the week: Monday, Tuesday, etc.
TIMER
TIMER
DISABLED
TIMER
DAILY
TIMER
WEEKLY