Kongskilde KDC 4000 Instructions De Service page 16

Cleaning brushes are
installed in the top, on the
left side of the cleaner
Rain cover for gear motor
The rain cover will protect the gearmotor against
impact from the weather when installed outdoor.
Kongskilde offers two types; one for 50Hz motors,
and one for 60Hz motors.
Rain cover 50Hz
Flexible connection
As a link between a pipe system and the cleaners
inlet funnel, a flexible connection is available. This
will allow stepless height adjustment of the cleaner
without dismantling of any pipes. The connection
can be adjusted in height, and is equipped with a
neoprene sock, to avoid penetration of rain.
The original top plate on the funnel is removed and
replaced by the new inlet funnel as shown.
16
Rain cover 60Hz
Test screens
A range of hand held screens with different perfora-
tions are available from Kongskilde. These can be
used to do preliminary cleaning tests, which will
give a good guideline for deciding screen selection.
Screens
Furthermore, inner and outer screens are offered
with varying hole diameters, please contact Kong-
skilde for further information. See also section
"Screen sizes".
Piping for conveying of impurities
A wide range of OK 200 piping components and
cyclones are available for conveying the impurities
from the cleaner to disposal into location for storage
of impurities. Furthermore, various OK 200 pipes
for in- and outlet are offered.