Télécharger Imprimer la page

Kongskilde KDC 4000 Instructions De Service page 15

Masquer les pouces Voir aussi pour KDC 4000:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Storage
If the cleaner is used for outdoor installation, and
will be out of use for a longer period, it is recom-
mended to open the outlets from the auger to avoid
water being collected in the bottom of the machine.
Technical data:
Max. capacity, pre-cleaning of grain
Screen area
Inner screen .............................................. 4,1 m
Outer screen .............................................. 6,5 m
Motor output / motor rpm (50 Hz)
Screen drum ................. 1,5 kW (2 HP)/1500 rpm
Fan ............................... 4 kW (5,5 HP)/3000 rpm
Auger .......................... 0,75 kW (1 HP)/1500 rpm
Motor output / motor rpm (60 Hz)
Screen drum ................................ 2 HP/1750 rpm
Fan ........................................... 5,5 HP/3500 rpm
Auger ........................................... 1 HP/1750 rpm
Screen drum ............................................ 22 rpm.
Weight
Without screens ........................................ 890 kg
With screen .............................................. 940 kg
Connections
Inlet, uncleaned crop ................................ OK200
Outlet, cleaned crop ................................. OK200
Discharge opening, fan ............................ OK200
Outlet, auger ............................................. OK160
Accessories for KDC 4000:
Transport wheels and drawbar
Wheels and drawbar for transportation on rough
ground after a tractor. Use only over short distanc-
es. All local traffic regulations must be observed -
be especially aware not drive too fast, to avoid any
accidents!
app. 40 t/h
2
2
Lifting equipment
For easy stepless adjustment of the inclination by
means of two longitudinal axles, turned by a crank
in the inlet end.
Cleaning brushes for the outer screens
When using outer screens with small or oblong
holes for separation of kernel sizes, the outer
screen can be clogged with impurities or kernels
blocking the perforation.
To clean the screens, it is advised to install clean-
ing brushes.
15

Publicité

loading