Publicité
Les langues disponibles
Les langues disponibles
Air leaking around the sides of the nose
Mask is not tightened correctly.
The mask does not fit properly
Mask is incorrectly assembled.
Cushion may be dirty.
Mask may be the wrong size
WARNING
•
The technical specifications of the mask are provided for your
clinician to check that they are compatible with the CPAP or
bilevel device. If used outside specification or if used with
incompatible devices; the seal and comfort of the mask may
not be effective; optimum therapy may not be achieved; and
leak, or variation in the rate of leak may affect the CPAP or
bilevel device function.
•
Discontinue using this mask if you have ANY adverse reaction to
the use of the mask, and consult your physician or sleep therapist.
•
Using a mask may cause tooth, gum or jaw soreness or aggravate
an existing dental condition. If symptoms occur, consult your
physician or dentist.
Tighten both upper and lower
headgear straps. Do not
overtighten.
Turn off the CPAP or bilevel device
and remove mask. Refit the mask
according to the instructions.
Ensure you position the cushion
correctly on the face before pulling
headgear over the head.
Do not slide mask down the face
during fitting as this may lead to
folding or curling of the cushion.
Disassemble the mask, then
reassemble according to the
instructions.
Clean cushion according to the
instructions.
Talk to your clinician to have your
face size checked against the
fitting template. Note that sizing
across different masks is not
always the same.
6
Publicité
