Sony DSR-40 Mode D'emploi page 52

Menu Organization
Menu options
AUTO OFF
AUTO REWIND
INDEX WRITE
CASSETTE MEMORY SEARCH
CASSETTE MEMORY ERASE
PHOTO PB
DV EE OUT
DISPLAY POSITION
CAUTION DISPLAY
BEEP
TIME CODE
(DSR-40 only)
PREROLL TIME SELECT
AFTER CUE-UP
PB STILL DELAY
RECORDER MODE
STILL TIMER
52 GB
Chapter 5 Menu Settings
Set this option to Description of settings
ON • To turn off the VCR automatically if there is no operation and the tape
stops for an hour (Auto Off).
OFF • To deactivate Auto Off.
ON • To rewind the tape to its beginning automatically if the tape reaches to
an end (Auto Rewind).
OFF • To deactivate Auto Rewind.
AUTO • To record index signals when recording begins.
OFF • Not to record index signals.
AUTO • To search recordings with the cassette memory. If the tape does not
have a cassette memory, the VCR will search recordings using index
signals recorded on the tape itself.
OFF • To search recordings using the index signals recorded on the tape.
ALL DATA • To erase all the data in the cassette memory. (When using the
cassette whose memory can store over 16 Kbits of data, you can only
select ALL DATA.)
INDEX DATA • To erase index data in the cassette memory.
DATE DATA • To erase date data in the cassette memory.
PHOTO DATA • To erase photo data in the cassette memory.
• To prevent the picture from blurring when playing a tape recorded in
FIELD
photo mode.
• To see a clear picture when playing a still picture.
FRAME
Note
When selecting FRAME, a picture recorded in photo mode may be blurred.
ON
• To output the selected line input signals from the DV jack.
OFF
• To output only playback video and audio signals from the DV jack.
CENTER
• To display the tape counter in the center of the monitor screen.
LOWER RIGHT
• To display the tape counter in the lower right of the monitor screen.
OFF
• Not to display the tape counter.
ON
• To display alarm messages on the monitor screen.
OFF
• Not to display alarm messages.
ON
• To output a beep sound when an illogical operation is made.
OFF
• To deactivate the beep.
• To set the time code to the same one as already recorded on the
AUTO
tape.
• To set the time code to Non Drop Frame.
NDF
• To set the time code to Drop Frame.
DF
Note
If you use AUTO and start recording at the beginning of the tape, the
time code is set to Non Drop Frame.
The preroll time can be set between 3 and 10 seconds by four steps.
3SEC
When an editing controller such as the PVE-500 has been connected,
5SEC
this setting is disabled and the editing controller's setting is in effect.
7SEC
The preroll time setting is also performed on the editing controller.
10SEC
• After a cue-up, the unit informs the editing unit that it is in stop mode.
STOP
(The unit is actually in still mode.)
• After a cue-up, the unit turns to still mode.
STILL
Playback still delay can be set between 0 and 9 frames by 11 steps.
0FRAME –
You can set the delay which the unit turns to playback mode from still
10FRAME
mode.
• To use the unit as a normal player.
NORMAL PLAYER
• To use the unit as a recorder with the FXE-120/120P in a system.
FXE RECORDER
You can set the time which releases still or pause mode to protect the
8SEC – 4MIN
tape. Select time from 6 settings ranging from 8 seconds to 4 minutes.