Sony DSR-40 Mode D'emploi page 17

To video equipment without the DV jack
Recorder
to the S-video
input jack
to the video
input jack
to the audio
input jacks
to the video
input jacks
S-video cable (not supplied)
75 Ω coaxial cable (not supplied)
XLR cable (not supplied)
Video cable (3BNCy3BNC) (not supplied)
Notes
• When you connect output jacks of the recorder to input jacks of this
VCR, select the input correctly to prevent a humming noise.
• Distorted signals (e.g., when played back at a speed other than normal)
will not be recorded properly.
• The indications (Time code, alarm messages, and menu, etc.) displayed
on the monitor screen are output only via the MONITOR connector.
• If the DV input is selected, you cannot perform the playback
synchronized with the video reference (black burst) signal.
Monitor
INPUT INPUT OUTPUT OUTPUT
VIDEO VIDEO
S VIDEO S VIDEO
VIDEO VIDEO
AUDIO CH-1/3 AUDIO CH-1/3
CH-1 CH-1 CH-1/3 CH-1/3
AUDIO AUDIO
CH-2 CH-2 CH-2/4 CH-2/4
MONITOR MONITOR
Chapter 2 Playback and Recording
This VCR (Player)
REF.VIDEO INPUT REF.VIDEO INPUT
Y Y R-Y R-Y B-Y B-Y
AUDIO CH-2/4 AUDIO CH-2/4
L: Signal flow
17 GB