Sony DSR-40 Mode D'emploi page 48

Adjusting Signals
Adjusting chrominance signal gain level of the composite signal
48 GB
Chapter 3 Using the Unit as a Player in an Editing System
1
Play back the DSR-40/40P, and output the signals from the VIDEO
connector of the OUTPUT connector.
The picture is displayed on the vectorscope.
2
Adjust R–Y signal gain level at the COMPOSITE R–Y GAIN menu
(See page 53).
3
Adjust B–Y signal gain level at the COMPOSITE B–Y GAIN menu
(See page 53).