Sony DSR-40 Mode D'emploi page 36

Connections for an A/B Roll Editing System
Audio monitor system connections
Speaker
(right channel)
Speaker
(left channel)
Reference video signal connection
PVE-500
Editing Control Unit
REF.
REF. VIDEO IN 75 Ω termination
VIDEO
switch: ON
IN
REF. VIDEO IN 75 Ω
termination switch: ON
UVW-1600/1600P
(player 2)
36 GB
Chapter 3 Using the Unit as a Player in an Editing System
The following shows an example of audio monitor system connections.
For details of these connections, refer to each connected device's instruction
manual.
Cables with RCA
Audio amplifier
phono plugs (not
supplied)
L R L R
When you perform recording or editing, be sure to use a reference video
signal.
For details of the reference video signals, see "About reference video signals" on
page 34.
DFS-500/500P
DME Switcher
4 3 2 1
BLACK BURST OUT
REF. VIDEO IN
MONITOR MONITOR
OUT 1 OUT 2
REF. VIDEO IN 75 Ω
termination switch: ON
REF. VIDEO IN
DSR-85/85P
(recorder)
REF. VIDEO INPUT
Use 75 Ω coaxial cables for all of these connections.
MXP-290
Audio Mixer
DSR-40/40P (player 1)