Troubleshooting - Haier HCH2100ACS Guide De L'utilisateur

4. Replace the light shield and snap closed.
5. Reconnect power.

TROUBLESHOOTING

First try the solutions suggested here to possibly avoid the cost of a service call.
Problem
Hood doesn't work Electric Supply
Poor Airflow
Motor running, but
no airflow
After running for
a while, the motor
stops.
Strong cooking
smell
Oil dripping onto
stove
Whirring sound
FOR MORE HELP, VISIT HAIER.COM OR CALL THE CONSUMER
HELP LINE AT 1-877-377-3639.
Possible Reason
Aluminum grease filters
are clogged
Charcoal filters are
clogged
Butterfly valve jammed
The high temperature
safety device is activated.
The hood is installed too
close to the stove
Charcoal filters are not
installed
Oil cup missing or not
installed
Aluminum grease filter
saturated
Fan blade problem
Solution
Check that the hood is plugged
into a receptacle.
Check that the power is turned
on.
Clean and dry the filters, and
then reassemble.
Replace the charcoal filters.
Call for service.
The kitchen is not sufficiently
ventilated.
The hood must be a minimum
of 255/8" (65 cm) above the
stove.
In re-circulating mode, charcoal
filters must be installed.
Replace aluminum filter and
replace oil cup.
Wash the aluminum grease
filters
Call for service
15