Make Electrical Connection; Complete Installation - Haier HCH2100ACS Guide De L'utilisateur

5. Slide the duct onto the bottom of the air deflector.
6. Place the assembled air deflector and duct over the exhaust outlet from the
hood.
7. Reassemble the air deflector to the duct cover bracket with 4 assembly screws.
8. Seal connections with vent clamps.

MAKE ELECTRICAL CONNECTION

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
1. Plug into a grounded 3-prong outlet.

COMPLETE INSTALLATION

1. For non-vented (recirculating) installations only, install charcoal filters over
metal grease filter. See the "Range Hood Care" section.
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light. See the "Range Hood
Use" section.
NOTE: To get the most efficient use from your new range hood, read the "Range
Hood Use" section.
WARNING
Electrical Shock Hazard
11