Testmode Menu - Honeywell E3Point Manuel D'utilisation

TestMode Menu

The TestMode menu performs a test of all functions on the unit. All
outputs are activated according to their failsafe mode, relay setting, and
buzzer setting. All functions are activated simultaneously for a maximum
of 3 minutes, or until the user cancels the test. The unit does not
detect gas during this TestMode procedure. Press enter to access the
TestMode.
Use the arrow keys to scroll to Yes or No and press any key to
•
begin the test sequence
To cancel the test, press enter at anytime when Stop displays.
•
28
* Menu *
TestMode
TestMode
Yes
TestMode
Stop
E Point Network Gas Monitor User Manual
3