Safety Considerations; Technical Data - Dustcontrol DC 3500 Manuel D'instruction

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be followed to reduce the
risk of fire, electric shock and personal injury,
including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it
in damp or wet locations or in presence of
flammable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended for.
3. Body injuries
Never let the suction come in contact with parts
of the body. The strong suction effect can
hurt the blood-vessels in the skin. Do not repair
the electric components yourself, get
somebody qualified. Faults may cause injury.
See also below under warnings.
4. Don´t abuse cord
Never pull the machine by cord. Keep cord

TECHNICAL DATA

HxWxL
Weight
Inlet
Hose length
Collection in container
Flow, max
Neg. pressure, max
Power consumption
Fine filter polyester, area 1.6 m
Degree of separation
(DIN 24184/3)
Filter area, microfilter
Degree of separation,
microfilter (DOP)
Soundlevel */
*/ Sound level at 1,6 m height and 1 m distance according to DIN
45635 Section 1 (4/84) in free space and at maximum airflow.
50 Hz 60 Hz
1550x600x800 mm
60 kg 60 kg
φ 50 mm φ 50 mm
5-15 m 5-15 m
30 l 30 l
3 3
260 m /h 320 m /h
28 kPa 31 kPa
2.5 kW 3 kW
2 2
1.6 m
99,89 % 99,89 %
2 2
1.2 m 1.2 m
>99,97 % >99,97 %
<75 dB(A) <75 dB(A)
DC 3500 - 8
from heat and sharp edges. Check the electric
cable regularly if damage.
5. Important measure
With cleaning and maintenance on the machine,
the power cable should be disconnected from
the supply.
6. Maintain the machine with care
Keep machine clean and check that the hose is
entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from oil
and grease.
7. Checking of damage
Before futher use of the machine it should be
carefully checked that the machine is un-
damaged. If there are any damaged parts these
should be repaired by of a Dustcontrol
authorized service center.
8. Warning
Use only accessories and replacable parts which
are available in Dustcontrol catalogue.
When using faulty parts or pirate parts
(especially filter) the machine could leak out
unhealthy dust which can cause personal
injuries.
Capacity
kPa
20
10
DC 3500
2.2 kW 50 Hz
100 200
DC 3500 3.0 kW 60 Hz
3
300 400 m /h
Art nr 9011