Peg-Perego duette sw 2008 Notice D'emploi page 11

C). Check that the wheels are properly attached by pulling them in opposite directions.
4 To fit the rear wheels, repeat the action carried out for the front wheels (sequence B and C).
The rear wheels can be identified by the black teeth, as shown in figure A. Check that the
wheels are properly attached by pulling them in opposite directions.
5 BRAKE: to activate the brake on the chassis, push down with your foot on the brake bar
located on the rear wheels, as shown by the arrows in the figure.
6 OPENING: activate the brake on the folded chassis. Unfasten the tab, as in the figure.
7 Lift the handlebar in the direction of the arrow (Fig. A). Press the handlebar downwards until
the final click (Fig. B).
8 Check that the opening is correct, as in the figure.
9 BASKET: fasten the basket on the chassis base, as shown in the figure, at six specific
points. Attach the four buttons, to the front and rear, as in figures A and B; then attach the
two Velcro strips to the chassis tube, as in figure C.
10 STEERING WHEEL: to guarantee good grip, the steering wheel may adopt four different
positions. To adjust them, press the button as in the figure.
11 STEERABLE WHEELS: the practical steering wheel allows you to steer the front wheels.
To steer, move the lever on the steering wheel to the right, as in figure A. To fix the wheels,
move the lever to the left, as in figure B.
12 EXTERNAL HANDLEBARS: the complete chassis may be lifted using the central external
handles (Fig. A) and the rear handlebar (Fig. B). The chassis must be lifted by two people.
Figure C shows the correct way to lift it.
13 WHEEL REMOVAL: press down on the lever at the centre of the wheel, as shown by the
arrow in figure A, and simultaneously pull the wheel towards you (Fig. B).
14 FOLDING: activate the brake and release the seats. To fold the chassis, lift the lever on the
handlebar (Fig. A), thus detaching the handlebar, and move it slightly forwards (Fig. B). Push
down on the safety lever with your left foot (Fig. C) to release the handlebar.
15 Rotate the handlebar downwards (Fig. A). Fold the chassis, attaching the tab to the
handlebar fastener (Fig. B).
GANCIOMATIC SYSTEM
Ganciomatic is a fast and practical system that allows you to attach the Primo Giro carrying
chair, the Navetta bassinet unit and the Primo Viaggio car seat (sold separately) to the
Ganciomatic Base in one step.
Place the item on the Ganciomatic Base and push down with both hands until you hear a click.
Always activate the chassis or stroller brake before attaching or removing products (refer to
the respective instruction manuals).
Follow the instructions for the product combinations.
16 DUETTE + 2 CARRYING CHAIRS
WARNING: to maintain product stability, always attach both carrying chairs. If for any reason
Duette SW is used for only one child, fit both carrying chairs anyway and ensure that they are
properly attached. Figures A, B, C and D show the attachment options for the chairs.
Figure D shows the "cot" position, obtained by reclining the backrests and lifting the
footboards, as in the figure.
17 DUETTE + 2 PRIMO VIAGGIO CAR SEATS
Figure A shows how to attach the product (facing the person pushing).