When 500 working hours has passed, the boiler
needs to be cleaned.
The display shows "Clean" and a periodic
acoustic signal is emitted.
Then carry out this procedure:
• disconnect the appliance from the electrical
power mains.(Fig. 3).
• remove the upper hood (Fig. 3);
• unscrew the two screws holding the cover,
remove the scamolex panel and vacuum and
clean all the dirt deposited (Fig. 4-5).
Having carried out cleaning and maintenance,
carry out this procedure:
• reposition or re-assemble everything you
touched to clean the boiler;
• re-connect the appliance to the electrical
power mains
• end the "Clean" signal by pressing
the
key.
You are advised to clean the "T" tube on the
smoke channel every month.
NOTE:
on reaching 500 working hours, the display
will show the writing "CLEAN".
The boiler will continue to work, but the cli-
ent is invited to carry out accurate mainte-
nance within his/her capabilities.
To eliminate the writing on the display, hav-
ing carried out maintenance, press the "#"
key.
MAINTENANCE
Fig. 3
Fig. 4
Fig. 5
- 85
-