EdilKamin LAGUNA M 25 Installation, Utilisation Et Entretien page 69

Power
In the settings menu, there is the name of the parameter, the minimum, the maximum and the ac-
tual value (Set).
Pressing the key you change the parameter and the Set field flashes and with the keys
and you can increase or decrease the parameter.
Press the key to confirm a new parameter is save, instead pressing
the key you cancel the operator and restore the previous data.
Pressing it again, you exit and return to the previous screen.
Note: after 60 seconds without pressing the keys, the system automatically exits the menu.
USER MENU
Combustion Pellet power
Management
Pellet recipe
Auger calibration
Fan calibration
Heating
Boiler Thermostat
Management
Buffer Thermostat
Summer-Winter
Chrono Mode
Program
Loading
Reset Service
INSTRUCTIONS FOR USE
• Daily
• Weekly
• Weekend
Parameter name
Maximum settable
Actual value
Minimum settable
DESCRIPTION
It changes the combustion power of the system
Menu to choose the fuel:
1. Pellets
2. Olive waste
3. Hazelnut shells
It allows variation in the working time of the auger
It allows you to change the speed of the smoke
fans
Menu to change the boiler thermostat
Menu to change the buffer thermostat
Summer or Winter selection mode
Select the chronothermostat programming mode.
Menu to program the times for programmed switch
on/switch off of the boiler
Manual loading of the auger in OFF status
Menu to reset the System Maintenance Function
Message
- 69
-