EdilKamin LAGUNA M 25 Installation, Utilisation Et Entretien page 68

ERRORS AND DISPLAYS
DISPLAY DESCRIPTION
Er01 Safety thermostat activation error (ask TSC for help)
Er02 Air pressure switch activation error (ask TSC for help)
Er03 Switch off error due to FLAME STOP
Er04 Water excess temperature error
Er05 Smoke excess temperature error
Er07 No smoke encoder signal error (ask TSC for help)
Er08 Smoke motor rotation adjustment problem error (ask TSC for help)
Er11 Internal clock error (ask TSC for help)
Er12 Switch on failed error
Er15 Temporarily no power supply error
Er16 Communication error with synoptic panel (ask TSC for help)
Er23 Boiler or buffer temperature probes error (ask TSC for help)
DISPLAY DESCRIPTION
Probes Status display of temperature probes. The message is displayed during
the Check up phase and indicates the temperature read on one or more
probes is equal to the maximum or minimum possible value.
Cleaning The message indicates 500 working hours has been reached for USER
cleaning (see page 85).
To reset the message, use the RESET SERVICE function.
Switch on The message appears if the system switched off non-manually during the
Block Switch off phase, the system will only switch off when it has reached fully
operational mode.
Link Error No communication between the keypad and the control board
USER MENU
On pressing the
By pressing the
Using the key you can enter the sub-menu by obtaining the list or the parameter to change.
INSTRUCTIONS FOR USE
key you enter the first screen on the menu
Combustion Management
Heating Management
Chrono
Loading
Service Reset
and key you scroll the menu highlighting the desired item.
- 68
-