USE
Controls
1 2 3
4
1. low setting
2. mid setting
3. high setting
4. intensive setting
(3 flashing)
EN 6
Switch the exhaust fan on and off
1. Slide the visor out until the stop.
2. Press '+' button.
The cooker hood switches on at the first setting.
3. If desired, select a higher setting with '+' button.
The indicator shows the choosen setting.
4. Press the '-' button to select a lower setting or to switch off the
hood.
• If the extractor hood is switched off with the visor, then the hood
remembers the last chosen speed setting.
• If you pull the visor fully open again the fan will switch on with the
last chosen speed setting.
Switching lighting on or off
1. Press the lighting button to switch the lighting on or off.
Timer function
1. Slide the visor out until the stop.
2. Press '+' button to choose a setting.
3. Press the timer button.
The extractor hood remains at the selected setting for 15 minutes,
after which the extractor hood is automatically switched off.
Carbon filters
The carbon filter must be used if the cooker hood is not connected to a
duct (see extraction systems).
Note:
• The carbon filter must be replaced at least twice a year, depending
on how much the cooker hood is used.
• Carbon filters cannot be cleaned to use again.
• Saturated carbon is harmful to the environment, replace the filter
regularly.