PowerPeak HOME TRAINER MAGNETIC Mode D'emploi page 30

Step 1: Assembling the front and rear stabilizer
10
18
19
7
21
22
STEP 1
Attach the front stabilizer (10) to the main frame (44) with two square neck carriage bolts (22), two
curved washers (7), two spring washers (19) and two cap nuts (18). Do not tighten the bolts fully.
Attach the rear stabilizer (21) to the main frame (44) with two square neck carriage bolts (22), two
curved washers (7), two spring washers (19) and two cap nuts (18). Do not tighten the bolts fully.
Step 2: Assembling the pedals
11L
11R
STEP 2
Attach the left pedal (11 L) to the left crank (41).
Attach the right pedal (11 R) to the right crank (41).
Step 3: Assembling the handle bar post and connecting the tension control and computer cable