Weblinkbox; Basic Functions; Login - Fancom WEBLINKBOX Notice D'installation

3.

WebLinkBox

The WebLinkBox is an interface between the controller and a PC. Controller data are
exchanged with the PC. The WebLinkBox can be accessed through the FarmManager
software as well as a web browser. This manual will help to work with the device
correctly. Chapter 4 explains some basic functions. The next chapters explain how to
connect the WebLinkBox correctly. To be able to work with the WebLinkBox proceed
as follows:
1. Connect the WebLinkBox directly to the PC (see page 6)
2. Include the WebLinkBox into an existing local network (see page 8)
3. Set the local network to be able to connect via the internet (see page 10)
If you have connected the WebLinkBox you can add and configure the controllers (see
page 11).
4.

Basic functions

4.1

Login

To login to the WebLinkBox via a web browser perform the following steps:
1. Start a web browser on the PC.
2. Enter the IP-address of the WebLinkBox in the address bar and click Enter:
3. Login with your password. The main menu appears:
•
Click a control computer name to go to the control panel of that control
computer.
•
Click System Configuration to configure control computers (see page 11).
Gndf
g
4