HOLZMANN MASCHINEN TS315F1600 Mode D'emploi page 44

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
12. Assembly saw blade guard
 Fix the saw blade guard (1) to the riving
knife (3) with a locking knob (2).
NOTE: The saw blade guard should be posi-
tioned as close as possible to the workpiece.
13. Assembly holder for the suction hose
 Mount the holder (1) for the suction hose
laterally in the boreholes (2) provided for it
at the table extension (length) with 2
washers and 2 screws.
 Fix the holder (1) with 2 nuts (2).
14. Assembly suction hose
 Attach the 30mm suction hose (1) to the
saw blade guard (3) with a hose clamp (2),
then hook the 30mm suction hose into the
holder.
NOTE: Ensure that the suction hose is not
kinked and that there is sufficient distance
between the suction hose and the work area.
 Fasten the other end of the 30 mm suction
hose (1) with a hose clamp (4) to the suc-
tion socket (5).
 One end of the 100 mm suction hose (6) is
attached to the suction socket (5) with a
hose clip (7) (not included in the delivery
content).
 The other end of the 100 mm suction hose
(6) is connected to a suction system.
ASSEMBLY
44
TS315F1600