HOLZMANN MASCHINEN TS315F1600 Mode D'emploi page 34

12.3 Safety devices
The machine is equipped with the following safety devices:
symbol pic
Riving knife
Push stick
12.4 General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
 Before start-up, check the machine for completeness and function. Only use the machine if
the guards and other non-parting guards required for machining have been fitted, are in
good operating condition and have been properly maintained.
 Choose a level, vibration-free, non-slip surface for the installation location.
 Ensure sufficient space around the machine!
 Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
 Ensure a clean working environment!
 Only use perfect tools that are free of cracks and other defects (e.g. deformations).
 Remove tool keys and other adjustment tools before switching on the machine.
 Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
 Check the strength of the machine connections before each use.
 Never leave the running machine unattended. If necessary, stop the machine before leav-
ing.
 The machine may only be operated, serviced or repaired by persons who are familiar with
it and who have been informed of the dangers arising in the course of this work.
 Ensure that unauthorised persons maintain an appropriate safety distance from the ma-
chine and, in particular, keep children away from the machine.
 Wear suitable protective equipment (eye protection, respiratory protection, ear protection,
gloves when handling tools,) as well as close-fitting work protective clothing - never wear
loose clothing, ties, jewellery, etc. - danger of being drawn in!
 Hide long hair under hair protection.
 Do not remove any sections or other parts of the workpiece from the cutting area while
the machine is running!
 Do not remove splinters and chips by hand! Use a sliding stick for this purpose!
 Always work with care and the necessary caution and never use excessive force.
 Do not overload the machine!
HOLZMANN MASCHINEN GmbH





www.holzmann-maschinen.at
A self-locking EMERGENCY-STOP button to stop
dangerous movements at any time.
Safety guard (adjustable): saw blade protec-
tion
Interlocking movable guard:
Safety cover of the saw blade (2) (secured with
bolts and equipped with a safety switch (1))
This safety switch interrupts the power supply
immediately when the cover is removed.
This measure is intended to prevent the work-
piece from kick back. The setting is in horizon-
tal and vertical direction opposite to the saw
blade.
For cutting operations where less than 120mm
is cut, i.e. less than 120mm distance to the
right of the saw blade to the rip fence. Do not
feed the wood by hand, but with the push
stick.
SAFETY
34
TS315F1600