Télécharger Imprimer la page

Digigram VX442 Manuel Utilisateur page 16

Masquer les pouces Voir aussi pour VX442:

Publicité

Les langues disponibles

Les langues disponibles

D
i
g
example, when "H/W In 1/2" is selected, any signal present at the IN1 port
will be copied to OUT1, and any signal present at the IN2 port is copied
to OUT2. This same behavior applies to "H/W In 3/4" when selected.
The next vertical column of the Patchbay/Router page "H/W Out 3/4,"
connects this hardware analog stereo pair to one of the five stereo sources:
1. The default setting, "WavOut 3/4", connects ports OUT3 and OUT4 to
your music software or Windows multimedia applet. In other words,
when
music
"WavOut 3/4 VX442" it will be routed directly to the "hardware" analog
outputs 3 and 4 of your VX442.
2. The second option, "AES/EBU In", connects ports OUT3 and OUT4
directly to the hardware AES/EBU input on the VX442. The left channel of
the AES/EBU In is routed to OUT3 and the right channel of the
AES/EBU In is routed to OUT4.
3. The third option, "AES/EBU In (L/R Rev.)", functions identically to the
second option, except that the left and right channels are swapped.
Therefore in this mode, the left channel of the AES/EBU In is routed to
OUT4 and the right channel of the AES/EBU In is routed to OUT3.
4. Options four and five connect the hardware analog inputs 1 & 2 or 3 & 4
(respectively) directly to the VX442's hardware analog outputs 3 & 4. For
example, when "H/W In 1/2" is selected, any signal present at the IN1 port
is copied to OUT3, and any signal present at the IN2 port is copied to
OUT4. This same behavior applies to "H/W In 3/4" when selected.
The rightmost vertical column of Patchbay/Router page, "H/W Out AES/EBU,"
connects the VX442's hardware AES/EBU output to one of six stereo sources:
1. The default setting, "WavOut AES/EBU" connects the AES/EBU Out port to
your music software or Windows multimedia applet. In other words,
when
music
"WavOut AES/EBU VX442" it will be routed directly to the hardware
AES/EBU output on your VX442.
2. The second option, "Monitor Mixer," connects the AES/EBU Out port to
the outputs of the VX442 monitor mixer. For more information on the
capabilities
"Monitor Mixer Page."
16
i
g
r
software
plays
software
plays
of
the
monitor
a
m
audio
to
audio
to
mixer,
please
the
device
named
the
device
named
see
the
section

Publicité

Chapitres

loading