Hayward AquaVac 300 Guide De L'utilisateur page 15

CHARACTERISTICS
Speed on floor
Floor coverage rate
Suction capacity
Ordinary consumption
Weight
Length and type of cable
Materials
Motor Unit
Speed (revolutions per minute)
Voltage
Current (amps)
Sealing protection
Box
Voltage surge protection
Self-diagnostic system
vice
Filter
Type
Material
Porosity
Area
Operating control
Type
Control system
Direct control with polyurethane tracks and stainless steel steering system
Power supply box
Voltage
Outlet power voltage:
Power current
Weight
IP
Transport
Dimensions of the cardboard box
Total weight
These specifications may vary depending on the type of pool and on the electrical installations.
Although AquaVac has been tested to operate in a broad range of swimming pools, the manufacturer cannot
guarantee that operation will be optimum in all types of pool.
18 metres per minute
5 m≤ per minute
283 litres per minute
0.78 amps
9.74 kg
16.76 metres, floating
High-impact ABS — metal parts: non-ferrous stainless steel
PUMP
2700
24 V ⎓
2.62
double redundant radial shaft seal
IPX8, sealed, waterproof, and made of high-impact ABS
automatic electronic system for interrupting current in the event of
voltage surge
memory self-test system — for use by authorised after-sales ser-
personnel
removable, reusable, pleated cartridge
pleated cellulose / polyester mixture
5 microns
64 cm
2
Adaptive Seek Control Logic (ASCL) microprocessor
230 V
24 V ⎓
3,5 - 4A
3.76 kg
IPX4
height: 48.3 cm - Depth: 48.3 cm - Length: 48.3 cm
15.9 kg
15
CONTROL
55
22 V ⎓
0.63
CARD
-
5 V ⎓
-