Hayward AquaVac 300 Guide De L'utilisateur page 14

CHECKING THE POWER SUPPLY BOX
The power supply box is protected by an automatic circuit that interrupts the current. To switch it back on,
move to the "OFF" position and then to the "ON" position.
The power supply box is equipped with an internal circuit. The voltage across terminals 1 and 2 of the power
supply socket for the cleaner must be 24 V ⎓.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or men-
tal capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
All electrical connections must be done by a qualified electrician according to local electrical standard.
F NF EN C 15-100
D DIN VDE 0100-702
A ÖVE 8001-4-702
E UNE 20460-7-702 1993, REBT ITC-BT-31 2002
IRL Wiring Rules + IS HD 384-7-702
I CEI 64-8/7
LUX 384-7.702 S2
NL NEN 1010-7-702
P RSIUEE
Warranty conditions:
All HAYWARD products are covered for manufacturing defects or material defects for a warranty period of 2
years as of date of purchases. Any warranty claim should be accompanied by evidence of purchase, indicating
date of purchase. We would therefore advise you to keep your invoice.
The HAYWARD warranty is limited to repair or replacement, as chosen by HAYWARD, of the faulty products,
provided that they have been subjected to normal use, in compliance with the guidelines given in their user
guides, provided that the products have not been altered in any way, and provided that they have been used
exclusively with
HAYWARD parts and components. The warranty does not cover damage due to frost and to chemicals. Any
other costs (transport, labour, etc.) are excluded from the warranty.
HAYWARD may not be held liable for any direct or indirect damage resulting from incorrect installation, incorrect
connection, or incorrect operation of a product.
In order to claim on a warranty and in order to request repair or replacement of an article, please ask your
dealer.
No equipment returned to our factory will be accepted without our prior written approval.
Wearing parts are not covered by the warranty.
EXCEPTIONS AND EXCLUSIONS FROM WARRANTY
The cleaner must be used with electrical requirements as indicated on the Power Supply. Otherwise damage,
defects, malfunctions or other failures of the cleaner arising from use on electrical supply not as indicated are
excepted and excluded from this warranty.
Defects, malfunctions, failure or damage of the cleaner caused by improper, unreasonable, or negligent use or
abuse by the consumer, are excluded from this warranty.
If any repair is made on your cleaner by anyone other than authorized personnel (designated to perform such
work) without first having obtained factory instructions, HAYWARD, at its sole option, may determine that this
warranty will not apply and that reimbursement for such repair will not be made because of failure to comply with
such factory specified instructions.
Filter cartridges are not covered by this warranty and will be replaced only with your prior approval of the
charges.
Electric standard/country
GB BS7671:1992
EW EVHS-HD 384-7-702
H MSZ 2364-702:1994 / MSZ 10-533 1/1990
M MSA HD 384-7-702.S2
PL PN-IEC 60364-7-702:1999
CZ CSN 33 2000 7-702
SK STN 33 2000-7-702
SLO SIST HD 384-7-702.S2
TR TS IEC 60364-7-702
14