Lenze L-force 9400 Instructions De Montage page 115

Connections
Pos. Description
PROFIsafe target address switch (on left side of housing)

X82.1
X82.2
Pluggable terminal strips for input and output signals
X82.3
X82.4
Addressing
An unambiguous PROFIsafe target address ensures that a data telegram reaches the
correct node.
DIP switch 
Value of the address bit

Note!
The combination of a safety module SM300 of version VA 1.08 or higher and a
PROFIBUS communication module of version VB 0.93 or higher makes it
possible to avoid the error that occurs when an address is set to 0. For this
purpose, a defined PROFIsafe target address must be stored in
C13897 or 14897 of the PROFIBUS communication module.
Terminal assignment
X82.1
X82.2
EDK94SH366 DE/EN/FR/ES/IT 3.1
1 2
1 2
Labelling Description
n. c.
n. c.
n. c.
n. c.
n. c.
This terminal strip is not assigned.
n. c.
n. c.
n. c.
n. c.
Labelling Description
- GND external supply
+ 24 V external supply via a safely separated power supply unit (SELV/PELV)
n. c.
n. c.
This part of the terminal strip is not assigned.
n. c.
n. c.
AIE Error confirmation input (Acknowledge Input Error)
CLA Clock output for passive sensors, channel A (clock A)
CLB Clock output for passive sensors, channel B (clock B)

Wiring the device modules
Safety modules
Labelling
3 4 5 6
4 8 16 32
6
7 8 9 0
64 128 256 512
115