Lenze L-force 9400 Instructions De Montage page 111


Note!
If all address switches adopt the "OFF" position when the basic device is
switched on, the configurations of codes C00350 (nodes address) and C00351
(baud rate) apply.
Switch the voltage supply of the basic device off and then on again to activate
altered settings.
Setting the node address
The node address of the drive is calculated from the sum of all address switches in the "ON"
position.
Setting the baud rate
d c
OFF ON
OFF ON
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON ON
OFF ON
OFF ON
EDK94SH366 DE/EN/FR/ES/IT 3.1
b a Baud rate
ON OFF 10 kbit/s
OFF ON 20 kbit/s
ON ON 50 kbit/s
ON OFF 125 kBit/s
OFF ON 250 kbit/s
OFF OFF 500 kbit/s
ON OFF 800 kbit/s
OFF OFF 1000 kbit/s
ON ON Auto baud

Wiring the device modules
Memory modules
6
111