Monacor TVCCD-400COL Mode D'emploi page 9

Please unfold page 3. Then you can always see
the operating elements and connections de-
scribed.
1 Operating Elements and Connections
1.1 Camera (figs. 1 and 2)
1 Adapter with 6.3 mm (
for ceiling mounting screw the adapter at the top
side of the camera
2 Setscrews to correct the mechanical focus setting
for the lens
3 Adapter ring for mounting a lens with C mount
thread
4 Protection cap
5 BNC jack for the video output, 1 Vpp at 75 Ω
6 On/Off switch for the automatic electronic shutter
7 Power supply connection 12 V ,
centre contact = positive pole
8 Jack for the connection of a video signal control-
led lens (auto iris)
1.2 Pin configuration of the plug for video
signal controlled lenses (fig. 3)
1 Operating voltage 12 V
2 Video signal 1 Vpp for the iris control
3 Ground
4 Ground
1
/ ") thread;
4
GB
9