Fluke Networks AirCheck Mode D'emploi page 24

AirCheck Getting Started Guide
To sort the list in ascending or descending sequence,

use
L
press
the access point that has the strongest signal,
highlight
L
press
with the strongest signal at the top of the list.
To sort in a secondary sequence, highlight a
different column heading, then press


Press
network.
The connect button shows as Connect* (with an
asterisk) if the tester cannot connect to the
highlighted network. To configure the network's
security settings, press
To connect to a secure network, the tester must
have a profile that includes security credentials.
Create or edit security credentials on the tester
or with AirCheck Manager. When you press
Connect* on the tester, it will guide you
through the security configuration. You can
also press Tools, then Manage profiles /
network passwords to reconfigure the
security settings. The * to the right of Connect
indicates no security settings have been
configured. Refer to the Users Manual for
setting up security procedures using Connect.
:

The color of the bars shows the status of the
country code for the regulatory domain.
18
 
and to highlight a column heading, then

or Sort 1. For example, to quickly find
at the top of the column, then

or Sort 1. This puts the access point
Connect to connect to the highlighted
The channel the tester currently monitors.

Connect*.
Note

Sort 2.