Where Is An Access Point; How Can I Document My Network And My Test Session; How Can I Erase Everything On My Aircheck - Fluke Networks AirCheck Mode D'emploi

What You Can Learn About Your Wireless Network?
To give an authorization status, select Access Points,
highlight an access point, then press
You can change all access points to authorized by
selecting Change all APs to Authorized. Then
you can assign each device's status as guest,
neighbor, flagged, or set to unauthorized.
To locate an access point, select it, then press
Locate on the Access Point Details screen.

Where is an Access Point?

Select Access Points, select one access point, then press

Locate on the Access Point Details screen. You
may also use the optional Fluke Networks external
directional antenna to help you find access points
faster.

How Can I Document My Network and My Test Session?

Save the session (press
PC software to download the data to a PC and make a
report.

How Can I Erase Everything on my AirCheck?

If you want to erase all settings, session data and
profiles from the tester, select Tools > Erase All -
Everything that has been saved or stored on the
AirCheck tester is erased
P
), then use AirCheck Manager

ACL.

13