Fluke Networks AirCheck Mode D'emploi page 14

AirCheck Getting Started Guide
The Security results report whether all APs on the
SSID use the same security credentials along with a
rating of
The Connection test attempts to connect to each
network configured in your profile. Connection
test results indicate whether you can connect to
networks at your location or not with a test
grade of Pass or Fail. Additional details about
the connection e.g., channel, IP address
received, connect rate is provided as a rating of
Pass,
 What unauthorized or unknown access points are
connected to my Wi-Fi network?
Are they a security risk?
The Rogue Access Points test indicates whether
unauthorized access point are detected with a
rating of
include a list of all rogue access points heard at
your location. Identification of rogue access
points requires configuration of the Access
Control List (ACL). ACL configuration is available
from the AutoTest screen by selecting Network
Quality > Rogue Access Points > ACL or
Home> Access Points > ACL.
8
Pass, Warning, or
Warning, or
Pass, Warning, or
Fail.
Fail.
Fail. Results