Settings - Progress PV1548 Notice D'utilisation

8 Progress
Consumption values
1) 2)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided
with your appliance.

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
Water
(l)
9.9
11.1 - 13.6
9.6 - 11.7
9.2 - 11.2
3.4 - 4.2
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold the on/off button until the
appliance is in programme selection
mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
Energy
(kWh)
0.936
1.052 - 1.285
0.886 - 1.083
0.556 - 0.680
0.012 - 0.015
flashes.
Duration
(min)
227
160
90
30
15