Sony SU-WL100 Mode D'emploi page 7

2
Referring to the Wall mounting
dimensions diagram on page 13,
determine the positions of the
screws for installing the Base
Plate.
WARNING
The wall that the TV will be mounted on should be
able to support a weight of at least four times that of
the TV. (Refer to your TV's instructions for its
weight.)
Determine the strength of the wall the TV will be
mounted on. Reinforce the wall sufficiently, if
necessary.
Step 4:
Installing the Base Plate
on the wall
1
Secure the Base Plate to the wall
using four or more 6 mm (
inches) diameter or equivalent
screws (not supplied).
Select four screw holes with the z mark shown in the
diagram below and tighten the screws securely so that
they will not become loose.
Align the unit so that it is level.
Base Plate
WARNING
• The screws required for this procedure are not
supplied. Select screws suitable for the material and
structure of the wall.
• If the Base Plate cannot be attached securely
enough, use additional screws.
• Be sure to confirm that the Base Plate is securely
attached to the wall.
1
/
4
7
(GB)