Get Started; Connecting The Device; Pre-Treatment Preparation - Silk-n Motion H3220 Mode D'emploi

6. Get started!

6.1 Connecting the device

1. Remove the device and other components from box.
2. Plug the adapter into the device socket (#7) and plug the
adapter into the electricity supply. All energy level indicator
lights (#1) will turn on, and then go off.

6.2 Pre-treatment preparation

[
Remove all jewellery on or near the treatment area before
use.
1. Before treating an area, the skin should be shaved, clean,
dry and free of any powders, antiperspirants or deodorants.
Do not wax, pluck or tweeze the hair out.
[
Never use flammable liquids such as alcohol (including
perfumes, sanitizers, or other applications containing
alcohol), or acetone to clean the skin before use.
[
Do not use the device if the treatment surface (#6) is
broken or missing.
2. Be sure to cover up moles, warts or other marks on the skin
that should not be treated. Use a material that does not
absorb the light such as a white cloth or white medical
tape.
17
EN