Publicité
Les langues disponibles
Les langues disponibles
External ring volume/melody
5.7.1 Handset External/Internal melody and volume
Press and hold the Program button
and the EXT-icon is flashing.
the desired volume (Off or 1-5)
5.7.2 Date time setting
DD-MM HH:MM (DD= day, MM=month, HH=houre and MM=minutes)
Enter the date and time using the number key. The flashing cursor can be moved by the scroll keys
the setting and to go to the next setting below.
5.7.3 Setting the Dial mode
There are two types of dialling mode: - 1 - DTMF/Tone dialling (the most common) (default) OR - 2 - Pulse dialling (for older installations)
Press '1' or '2' and press
5.7.4 Setting the Flash time
There are two flash times: - 1 - 100ms OR - 2 - 250 ms
Press '1' or '2' and press
5.7.5 Base melody and volume
The base ringer is heard.
desired volume (Off or 1-5)
5.8
Keypad lock
When the keypad is locked, pressing any key will have no effect during standby (except holding the
appears on the display and the keypad is locked.
5.9
Turning handset ON/OFF
Press
and hold to turn off. Press
6
Caller-ID function (Display the telephone number of incoming calls)
This function is only possible if you are subscribed to a telephone operator that provides this service. When you receive a call, the numbers
are saved in a Call list. This list can hold 10 telephone numbers (each of max. 20 digits). When you've received a new unanswered call,
the CLIP symbol
will blink on the display.
6.1
Consulting the Call list
Press the Call Log button
answered calls the
-icon appears and unanswered calls the
(if longer then 12) or to show the date and time.
bottom of the list an error tone will be sounded
number by pressing the Off-hook button
7
Answering machine
The Diablo has a built-in digital answering machine with a recording capacity of 11 min. The answering machine can be operated from the
handset and remotely. It features the possibility of recording two outgoing messages (OGM 1 and OGM 2) (maximum of 3 min).
There are 2 possibilities:
•
With OGM 1, the caller has the possibility to leave a message
•
With OGM 2, only the outgoing message is given without the caller having the opportunity to leave a message
An internal voice will state various information, such as day and time of the call, as well as settings such as Security code, ringer tones,...
The language of the internal voice is depending from the country sold (English or German).
The max. recording time for each incoming message = 2 min.
7.1
Display
The TAM icon
will appear when the answering machine is turned ON. It's starts flashing if new messages have been received
(regardless of the answering ON/OFF mode). If the answering machine is switched Off, the
The
icon will flash fast if the internal memory is full and no new messages can be recorded.
When entering the answering machine mode (see below) the display will show the following if:
•
If no new messages are received: '- - - - - - - - - - - -' and a flashing
•
If new messages are received the unit will start playing the messages and show ' -NN- -MM- '. NN = total of messages and MM=
number is message currenctly played.
7.2
Entering the Answering controle mode
To start operating the answering machine you have to press the answering machine key
will be played to the handset. If all new messages are played the new messages can be deleted if
end of the last message.
To leave the answering controle mode, press the
Following functions are available under each numerical key:
'1'
To hear main menu
'2'
Play all messages
'3'
Play new messages
'4'
Skip back during message playback
'5'
Deleting messages
'6'
Skip forward during messgage playback
'7'
Set answer On or Off
'8'
Hear the outgoing message menu
'9'
To set the security code
'0'
To set the day
'*'
Set the answering delay
'#'
To record a memo
7.2.1 Turning Answering Machine On/Off
If the answering machine is On, the
will automatically pick up the line after a number of rings (§ 7.2.2 ). To turn it On or Off, press '7'.
14
Dial mode setting
until the icon
Select the desired melody (1-5) by entering a number (1 - 5).
Press
again to confirm the setting and to go to internal melody and volume (same as above).
again to confirm the setting and to go to the next setting below.
again to confirm the setting and to go to the next setting below.
Select the desired melody (1-5) by entering a number (1 - 5).
Press
again to confirm the setting and to go back to standby.
for 2 seconds to turn back ON.
. The last received call is shown on the display. If the list is empty, '----------' is shown on the display. For
Use the scroll keys
You can leave the Call list by pressing the on-hook
.
-key again. In no instruction is received for 8 seconds, the unit shall return to idle.
-Icon appear on the display in standby (or blink when there are new messages) and the machine
Internal ring volume/melody
Flash time setting
Base ring volume/melody
starts to flash.
Press the Program button again, the external melody is heard
Press twice the
key again to un-lock the keypad.
-icon appears
to scroll to the previous call. When you reach the top or
-icon.
Date/time setting
Use the scroll keys
.
Press
Use the scroll keys
key). Press and hold the
Press the program
key to show the other digits
button. You can dial out the
icon will not appear.
. If you have new messages the messages
is pressed within 8 seconds of the
Topcom Diablo 150/Twin/Triple/Quattro
to select
again to confirm
to select the
key.
Publicité
