Setting The Flash Time; Setting The Ring Volume; Caller-Id Function (Clip); New Calls - Topcom Butler 2700 Mode D'emploi

B2700_euro.QXD
All manuals and user guides at all-guides.com
Butler 2700/DUO

5.10.1 Setting the Flash time

Set the switch on the bottom of the base in the desired posi-
tion!

5.11 Setting the ring volume

Press the volume button
desired handset ring volume is heard.
Remark: The Base ring volume cannot be set!

6. CALLER-ID FUNCTION (CLIP)

The Butler 2700 displays the telephone numbers of incoming
calls. This function is only possible if you are subscribed to a
telephone operator that provides this service. Contact your
telephone provider for more information. When you receive a
call, the numbers are saved in a Call list. This list can hold
10 telephone numbers (each of max. 10 digits). If the num-
ber is longer then 10 digits, only the last 10 digits are shown
and stored!

6.1 New calls

When you've received a new unanswered call, the CLIP sym-
bol appears on the display.

6.2 Consulting the Call list

When you consult the Call list, you will notice that the list
always starts with the last call received.
• Press the Call Log button
button.
• Use the Up
list. The Up key
record, the Down key
record.
• You can leave the Call list by pressing the R button.
24/6/02 9:09 am
a few times in standby until the
and Down
will skip backwards to the previous
will skip forward to the next
12
Pagina 12
or the Up or Down
buttons to scroll through the