Context Menu Barcode Object; External Trigger; Trigger Via Usb Interface; Trigger Via External Switch - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

2.7.3. Context menu barcode object

If a barcode object is inserted (see "Objects", page 60), the configuration corresponds to
the presettings.
The context menu can be used to individually set each barcode object deviating from this.
To open the context menu, right-click the desired barcode object.
f
The context menu opens as in the following figure.
Barcode format
Generate Graphic
Delete object

2.8. External Trigger

REINER optional accessories are available for external trigger types.
See online help for technical data.

2.8.1. Trigger via USB Interface

Connect REINER USB trigger cables to Micro-USB socket
f
7
Set set wheel to the desired print pattern.
f
Close contact.
f
Desired print pattern is printed.

2.8.2. Trigger via External Switch

Triggering via external switch uses a galvanically insulated contact.
An external voltage source is required for triggering - DC 2,4 - 24 V.
Connect the REINER trigger cable to the plug-in socket for external triggering
f
7
Set set wheel to the desired print pattern.
f
Close contact.
f
The desired print pattern is printed.
To change the barcode format.
Fastens the barcode in the current position. Note: the barcode
cannot be processed anymore after fastening.
Deletes the object.
9
.
10
GB
.
73