Firmware Update - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

1.6. Firmware update

The most up to date firmware for the jetStamp graphic 970 can be downloaded from the
REINER website (www.reiner.de).
Before performing a firmware update, transfer and save the print images on the
jetStamp graphic 970 to the PCset graphic. The print images can be damaged during
the Firmware update.
Ensure that the PCset graphic is installed on your PC but not opened before the
firmware update is started. While the firmware update is being installed, the jetStamp
graphic 970 must not be switched off.
Connect Micro USB socket
f
To activate the device, turn the setting wheel
f
Unpack "Firmware update" and start "970 Firmware xxxx.exe". The firmware is installed
f
automatically. After a successful firmware update, the PCset graphic can be opened again.
56
9
to the PC via the USB cable.
7
to position 1.