Technical Data - Reiner jetStamp graphic 970 Mode D'emploi

jetStamp graphic 970

5.2. Technical Data

Technical Data
Dimensions standard device
Dimensions base station
Total height
Weight standard device
Weight base station
Max. printing range
Max. printing speed
Print resolution
Battery capacity
Print technology
Barcode print
Barcode for continuous numbering/dating
Graphics
Ambience temperature for operation
Recommended ambience temperature for
operation
Humidity for operation
Recommended humidity for operation
Temperature for storage
Humidity for storage
Temperature for transport
Humidity for transport
Data transfer
Power supply
Standby time per battery charge
Battery charge time
Data retention (independent of batteries)
Print capacity per print cartridge
Protection type
82
140 × 160 × 85 mm (W × H × D)
155 × 140 × 30 mm (W × H × D)
175 mm
approx. 520 g
approx. 480 g
65 x 12.7 mm (W x H)
< 1 s/print
300 dpi
at least 1000 prints
Termal inkjet
EAN 8, EAN 13, 2/5 Interleaved, 2/5 Industrial, 2/5
Matrix Code 39, Code 39 Full ASCII, Code Codabar, Code
93, Code 93 Full ASCIIr, Code 128 B, GS1 128 (EAN 128)
Code 128 B, Code 39, 2/5 Interleaved
BMP, JPG, TIFF, Gif
10 °C ... +40 °C
16 °C ... +32 °C
8 % ... 80 % relative humidity
10 % ... 70 % relative humidity
1 °C to +43 °C
5 % ... 80 % relative humidity
-20 °C to +60 °C (up to 12 hours)
10 % ... 90 % relative humidity
USB
3 × AA NiMH rechargeable battery, can be charged
through enclosed mains adapter. Input: 100 – 240 VAC,
50 – 60 Hz, 0.3 A output: 5 VDC 1 A
approx. 72 hours
approx. three hours
approx. 10 years
approx. 5,000 prints depending on ink and print mode
,
IP 20 Degree of contamination 2, equipment class 3