Using The Unit; Approved Kombiengines - Stihl FH-KM Notice D'emploi

English

Using the Unit

Do not use your power scythe during
other people's rest periods.
The power scythe is used at ground
level. As its blades operate like a mower
bar, the unit is ideal for cutting scrub,
thicket, reed, wild growth and hard
grasses. The power scythe is
particularly suitable for applications in
busy areas, such as traffic islands or
parks, because cuttings are not caught
and thrown by the blades.
Disposal
Do not throw cuttings into the garbage
can – they can be composted.
Preparations
Set cutter bar to required angle.
N
Remove the blade scabbard.
N
Start the engine.
N
Put on the shoulder strap.
N
Attaching Machine to Shoulder
N
Strap
6
Working Technique
Working position and method are the
same as for a brushcutter: Sweep the
cutter bar to and fro in an arc just above
the ground.

Approved KombiEngines

KombiEngines
Only use KombiEngines supplied or
explicitly approved by STIHL for use with
the attachment.
This KombiTool may be operated only in
combination with the following
KombiEngines:
1)
KM 56 R, KM 85 R , KM 94 R,
KM 111 R, KM 131, KM 131 R,
KMA 130 R, KMA 135 R
Brushcutters with split boom
The KombiTool can also be fitted to
STIHL brushcutters with a split boom (T-
models) (basic power tools).
This KombiTool can therefore also be
used on the following machine:
STIHL FR 131 T
WARNING
Refer to the user manual of the power
tool for use of the barrier bar.
1)
Only outside EU
FH-KM