Spektrum MR3000 Guide De L'utilisateur page 6

EN
Binding
You must bind the MR3000 receiver to the transmitter before it will operate. Binding
teaches the receiver the specific code of the transmitter so it only connects to that
transmitter.
1. To bind an MR3000 to a compatible transmitter, insert the bind plug in the BD
port on the receiver.
2. Power the receiver through any open port. The LED on the receiver should be
flashing, indicating the receiver is in bind mode and ready to be bound to the
transmitter.
Note: To bind a boat with an electronic speed controller that powers the receiver
through the throttle channel (ESC/BEC), insert the bind plug into the BD port
in the receiver and the throttle lead into one of the throttle (TH) ports.
3. Move the steering wheel and throttle on a surface transmitter and the sticks and
switches on an aircraft transmitter to the desired failsafe positions, generally
low throttle and neutral steering positions. See the failsafe section for more
information about failsafe.
6