Replacing The Fuse; Technical Specifications - EuroLite HPS-1500 Mode D'emploi

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature t
Maximum housing temperature t
Fuse:
Fitting lamp:
OMNILUX A1 230V/500W GX-9,5
GE A1/244 240V/500W GY-9,5
OSRAM 64680 A1/244 230V/500W GY-9,5
PHILIPS 7389 A1/244 230V/500W GY-9,5
GE CP82 FRJ 240V/500W GY-9,5
PHILIPS 6820P 230V/500W GY-9,5
GE M40 230V/500W GY-9,5
OSRAM 64672 M40 230V/500W GY-9,5
PHILIPS 6877P 230V/500W GY-9,5
GE T18 GCW 240V/500W GY-9,5
Please note: Every information is subject to change without prior notice. 06.08.2004 ©
220-250 V AC, 50 Hz ~
1500 W
Max. 3
3-pin XLR
385 x 320 x 330 mm
6 kg
: 45° C
a
: 295° C
B
F 8 A, 230 V
No.
24/46
88384005
88384000
88384010
88384015
88384100
88384115
88384200
88384210
88384215
88384300
41601025_V_1_2.DOC