Specifications - Sharp LL-191A Mode D'emploi

Product specifications
Model name
LL-191A-W (White)/LL-191A-B (Black)
LCD display
48 cm measured diagonally TFT LCD module
Resolution (max.)
SXGA 1280 x 1024 pixels
Displayable colors (max.)
Approx.16.19 million colors (6 bit + FRC)
Brightness (max.)
220 cd/m 2
Dot pitch
0.294 (H) x 0.294 (V) mm
Contrast ratio
500:1
Angle of visibility
Left-right 160°; up-down 160°
(contrast ratio > 5)
Screen display size
Horizontal 376.3 mm x Vertical 301.1 mm
Video signal
Analog RGB (0.7 Vp-p) [75Ω]
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to
full screen size.)
Plug & Play
VESA DDC2B compatible
Power management
VESA: based on DPMS
Speaker output
1 W + 1 W
Input signal terminal
Mini D-sub15 pin (3 row)
Audio input terminal
Mini stereo jack
Headphone terminal
Mini stereo jack
Screen tilt
Upward approx. 0 - 25°; downward approx. 0 - 5°
Power supply
AC100 - 240 V, 50/60 Hz
Temperature of operating environment
5 - 35°C
Power consumption
33 W (with no audio input)
(36 W maximum, 1.8 W when in power-saving
mode)
Dimensions
Approx. 419 (W) x 213 (D) x 409 (H) mm
Weight
Approx. 7.8 kg (approx. 5.7 kg excluding stand)
(Excluding cables.)

Specifications

Dimensions
- Analog signal cable: approx. 1.8 m
- Audio cable: approx. 1.8 m
Note:
- As a part of our policy of continuous
improvement, SHARP reserves the right to make
design and specification changes for product
improvement without prior notice. The
performance specification figures indicated are
nominal values of production units. There may
be some deviations from these values in
individual units.
24
(Units: mm)