Sharp LL-191A Mode D'emploi page 25

Relevant signal timings
Display mode Hsync
VESA
US text
Power
Macintosh
series
Sun Ultra
series
- Recommended resolution is 1280 x 1024.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and the Sun
Ultra series are reference values. To connect,
another adapter (commercially available) may
be required.
- If the monitor is receiving timing signals that are
not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), [NO SIGNAL] will appear.
Specifications
The analog RGB input connector pin
(Mini D-sub connector with 15 pins)
Dot
Vsync
frequency
Power management
The monitor is based on VESA DPMS (Display
Power Management Signaling).
To activate the monitor's power management
function, both the video card and the computer
must conform to the VESA DPMS standard.
DPMS: Display Power Management Signalling
DPMS mode
ON
STANDBY
SUSPEND
OFF
DDC (Plug & Play)
This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or computer. It
transfers information such as degree of resolution
between the monitor and computer. You can use
this function if your computer is DDC compliant
and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC2B.
25
No. Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 GND
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 +5V
10 GND
11 GND
12 DDC data
13 For Hsync signal input
14 For Vsync signal input
15 DDC clock
Screen
consumption
Display on
Display off
Power
H-sync V-sync
Yes Yes
36 W
No Yes
1.8 W
Yes No
No No