Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Battery charger 6 Amp. 12V
CONTENTS
1. UTILISATION ACCORDING TO THE INTENDED PURPOSE
2. SCOPE OF SUPPLY
3. SPECIFICATIONS
WARNING
Read the operating instructions through carefully before use and observe all the safety notes! Keep
the original packaging, the purchase receipt and these instructions for subsequent reference use! Not
observing the instructions may cause personal injury or damage to the device or your property! Before
using the device for the first time, check the contents of the packaging for integrity and completeness!
1. UTILISATION ACCORDING TO THE INTENDED PURPOSE
The charger is suitable to charge open and a variety of closed, maintenance-free lead acid batteries, such as:
• Wet batteries (WET), lead acid batteries (liquid-electrolyte)
• Gel batteries (gel-type electrolyte)
• AGM batteries (electrolyte in fibreglass fleece)
• Maintenance-free lead acid batteries (MF)
Other batteries may not be charged with this device.
The charger may not be used as jump-start assistance. First charge the battery of the vehicle completely and remove the charger
before starting the vehicle.
The charger may not be used as direct current source or for other purposes.
The battery charger is designed for the application in protected environment at temperatures of -15 °C to +40°C.
This device is not designed to be used by children or persons with limited metal abilities or without experience and/or lack of know-
how. This device has to be kept out of reach of children.
The device is not designed for commercial use.
Utilisation according to the intended purpose also includes the observance of all information in these operating instructions, particu-
larly the observance of the safety instructions. Any other utilisation is considered to be contrary to the intended purpose and may lead
to material damages or personal injuries. EAL GmbH is not liable for damages caused by inappropriate use.
2. SCOPE OF SUPPLY
1 x Battery charger
2 x Cable holders
3. SPECIFICATIONS
Mains voltage input:
230 V AC 50 Hz
Charging voltage:
12V DC
Battery:
Pb-Battery min. 20Ah, max. 80 Ah
Weight:
1.8 kg
1 x Spare fuse 7.5 A
Power consumption:
Charging power:
Ambient temperature:
Fuse:
1 x Operating instructions
64W
6 A
-15 °C to + 40 °C
Blade-type fuse 7.5 A
4
4
4
5
5
5
5
5
6
6
6
6
6
6
5
Publicité
Chapitres
Table des Matières
