Information On Operation - REMIS REMIfront T5 Notice De Montage

C. Information on operation
C1
C2
D. Information on maintenance and repair
1. Care:
2: Maintenance/repair:
3. Retention of documents:
4. Replacement procurement:
Operation of the front system
C1 + C2:
Press both buttons in the direction of the arrow to unlock
the front blackout. Then pull the entry handle from the
left and from the right in the direction of the centre of the
windscreen. The handle bars close automatically by means
of a magnetic lock. Pull the handle bars apart on the han-
dles in the direction of the arrow to open and guide them
back into the rest position. Lock the handle by pressing on
the frame. Make sure that both sides are locked cor-
rectly before powering the vehicle!
As a general rule, do not use aggressive clean-
ing agents (solvents/abrasives). Frame compo-
nents from the front system can be cleaned with
a damp cloth and mild soapy water. The folding
material can be cleaned carefully with a soft
brush, and if necessary, with a damp cloth.
The system is designed to be maintenance-free.
Where possible, user information with operating
instructions and documents should be kept in
the vehicle in case of need.
You can obtain spare parts from your specialist
retailer.
US/GB
21/64