FujiFilm FUJINON Premista28-100mmT2.9 F/M Mode D'emploi page 25

This content explains important notices for all the users to use this product safely.
Read the content carefully before using, and follow the instructions.
The following signs of WARNING and
WARNING
Indicates the possibility of causing death or serious injury when misused.
CAUTION
Indicates the possibility of causing injury or substantial damage when misused.
WARNING
◆ Do not moisten inside of the appliances. It may cause fire or electric shock.
If the incident occurs, shut off the power supplied to the lens immediately.
◆ Be sure to attach all the parts securely. Dropping any parts from a height may cause severe accidents.
◆ Do not look at any sorts of strong illuminant such as the sun through the lens. Eyes could be harmed.
CAUTION
◆ Take care when carrying the lens. Dropping the lens while carrying may cause injury.
◆ Be sure to confirm that the camera to be used with the lens system (lens and accessories) is able to supply
sufficient electric power to the lens system. If not, the lens system may not work normally and the camera will
be damaged. The values of the power consumption of the lens and the accessories are described in
"Specifications" section of their operation manuals.
◆ Before supplying the power to the lens, make sure all the parts are connected correctly.
◆ In order to install or release a cable, be sure to hold the joint part. Do not damage the cable by gripping. It
may cause fire or electric shock.
◆ If any sorts of incidents such as unusual smoke, noise, smell or obstacles are found, shut off the power
supplied to the lens and detach the lens from the camera immediately. Please notify the sales agent from
which you purchased the product.
◆ Do not remodel the instrument: it may impair the functions of product or cause electric shock.
NOTICE
◆ Lens and its accessories are extremely precise instrument, then be sure not to apply the strong impacts to
them. If the lens is of a type in which the rear lens protrudes from the flange surface of the lens mount, be
sure not to apply impact to the lens part when installing or releasing.
◆ There may be a case that the glasses of the lens mist when the lens is carried from a cool place to a place
of high temperature and high humidity. To avoid a mist on the glasses, before moving the lens, let the lens
adjust to the ambient temperature of the place where the lens will be used.
◆ Be sure not to apply impact to the front part of the lens when operating the camera.
◆ Put the cap on the lens while the camera is not used.
◆ If an accessory to be attached to the lens is equipped with a mechanical drive relaying part, before attaching
it, check the joint part and get rid of all obstacles. If there are any unusual conditions, please contact the
sales agent from which you purchased the product.
◆ When the lens is used in the weather of fog, raining, or snowing, cover up the lens to prevent it from the
water.
◆ To minimize the impact to the lens in transportation, set the zoom to the wide end and the focus to the
infinity side end before releasing the lens from the camera.
FOR YOUR SAFETY
CAUTION show :
- i -