Operation; Modes Of Operation - Tripp-Lite SmartOnline SU1000XLCD Manuel Du Propriétaire

Operation

Modes of Operation

ON LINE MODE:
ON LINE mode is the standard operating mode for your UPS where
connected equipment is offered the highest level of protection. In
On-line mode, the UPS provides continuously regulated AC output
and recharges the battery system as needed. If input power
becomes unstable, the UPS will automatically maintain sine wave
output from battery reserves.
ONLINE MODE SAMPLE LCD SCREEN
LCD ELEMENTS CONFIRMING ON-LINE MODE OPERATION
> INPUT ICON: ON SOLID (input power is present, bypass is available)
> INPUT ICON: FLASHING (input power is present, bypass is not
available)
> SINE WAVE ICON: ON SOLID (confirms on-line, double conversion
operation)
ON LINE MODE LCD VIEWING OPTIONS:
When entering ON LINE mode for the first time, the LCD screen will
display the INPUT VOLTAGE screen. To display additional information
screens, tap the SETUP button repeatedly.
information screens are (1) INPUT VOLTAGE, (2) INPUT FREQUENCY,
(3) OUTPUT VOLTAGE, (4) OUTPUT FREQUENCY, (5) LOAD
PERCENTAGE, (6) LOAD KVA, (7) LOAD KW, (8) BATTERY CHARGE
PERCENT, (9) BATTERY VOLTAGE, (10) ESTIMATED RUNTIME. Each
time the UPS is set to ON LINE mode, the LCD will display the last
viewed informational screen.
13-03-138 93-3168-EN.indd 16
ON BATTERY MODE:
In this mode, the UPS is providing battery-derived sine wave AC
output to connected equipment. Battery mode is an automatic
response to power failure or extreme voltage fluctuation while the
UPS is running in on-line or economy modes The UPS can also be
cold-started into Battery mode manually during a power failure by
pressing and holding the ON button. The UPS will automatically
return to the last configured operating mode once utility power is
restored and stable. To silence the audible alarm, press the ON
button. The alarm will re-sound to warn of low battery conditions. As
batteries become fully depleted, the UPS alarm will sound for 5
seconds continuously and AC output will turn off.
ON BATTERY MODE SAMPLE LCD SCREEN
LCD ELEMENTS CONFIRMING ON-BATTERY MODE OPERATION
> BATTERY ICON: ON (CONFIRMS BATTERY MODE OPERATION)
ON BATTERY MODE LCD VIEWING OPTIONS:
When entering BATTERY MODE, the LCD screen will automatically
begin reporting ESTIMATED RUNTIME information.
The 10 available
additional information screens, tap the SETUP button repeatedly. The
10 available information screens are (1) INPUT VOLTAGE, (2) INPUT
FREQUENCY, (3) OUTPUT VOLTAGE, (4) OUTPUT FREQUENCY, (5)
LOAD PERCENTAGE, (6) LOAD KVA, (7) LOAD KW, (8) BATTERY
CHARGE PERCENT, (9) BATTERY VOLTAGE, (10) ESTIMATED RUNTIME.
16
To display
3/28/2013 1:05:23 PM