Tripp-Lite SmartOnline SU1000XLCD Manuel Du Propriétaire page 8

Features
4 SETUP BUTTON: This button offers two main functions
depending on the state of the UPS when it is pressed:
CHANGE INFORMATION SCREEN DISPLAY and ENTER SETUP
MODE
ADVANCE LCD DISPLAY
Advances the LCD screen to the next of 10 available informational
screens. See the LCD Status and Supported Measurements
section for more information.
TAP the SETUP BUTTON during ANY operating mode to advance
the display
The LCD screen will advance to show the next available value
HOW? TAP the STANDBY BUTTON (less than 1 second)
repeatedly to view all 10 information screens
WHEN? The UPS must be running in any available operating mode
and not be reporting an error or shutdown code in order for
the ADVANCE LCD DISPLAY function to take effect
ENTER SETUP MODE
Places the UPS in setup mode to customize UPS operating presets
PRESS and HOLD the SETUP BUTTON during ANY operating mode
to enter UPS SETUP mode
The LCD screen will advance to the first setup screen see the
UPS SETUP OVERVIEW section for more detailed setup
information
13-03-138 93-3168-EN.indd 8
• W AKE UP LCD (applies to all buttons)
The LCD screen automatically dims when the UPS receives no
user input for about 1 minute.
dimmed, the first press of any front panel button serves only to
wake-up the LCD screen to full brightness. Once the LCD is at
full brightness, the UPS can receive your input normally.
8
Whenever the screen is
3/28/2013 1:04:53 PM