Basic Connection And Start-Up; Quick Start Guide - Tripp-Lite SmartOnline SU1000XLCD Manuel Du Propriétaire

Basic Connection and Start-Up

Quick Start Guide

1 Plug your UPS's line cord into an electrical outlet.
Your UPS must be connected to a dedicated circuit of sufficient
amperage. Note, however, that select models may be fitted with
different plug types. Refer to the rating table on top of your UPS
for more details on each selectable operating voltage.
Once plugged in, the UPS will automatically power on into
STANDBY MODE. This process takes approximately 15 seconds
and requires no user input as the UPS runs through a brief series
of internal tests. Once complete, the UPS will power-on into
standby mode and report OFF on the LCD screen.
2
Plug your equipment into your UPS.
Your UPS is designed to support computer equipment only. You will
overload your UPS if you connect household appliances or laser
printers to the UPS's outlets.
13-03-138 93-3168-EN.indd 11
1
Your model may differ.
STANDBY MODE LCD SCREEN
> PLUG icon ON (confirms INPUT POWER status)
> Battery charge display (reports battery charge level)
>"OFF" refers to OUTPUT status (as indicated by the "OUT" icon)
> SPEAKER icon (Audible alarm status)
2 Your model may differ.
11
3/28/2013 1:05:07 PM