Spare Parts - Wilo Rexa PRO Notice De Montage Et De Mise En Service

APPENDIX
In addition to the information in the "Maintenance
and repair" section, note the following points for
Ex-rated pumps:
• The maintenance and repair work described in this
operating and maintenance manual must be carried
out properly.
• Repairs and alterations to the construction which
are not listed in this operating and maintenance
manual or which may impair explosion protection
may only be performed by the manufacturer or by
service dealers certified by the manufacturer.
• The spark-proof gaps may only be repaired accord-
ing to the manufacturer's design specifications.
These must not be repaired using standard gap
dimensions.
• Only the screw plugs stipulated by the manufactur-
er, fulfilling at least a strength category of 600 N/
mm², may be used.
Cable changes
Cable changes are strictly prohibited and may only
be carried out by the manufacturer or by service
centers certified by the manufacturer.

10.3. Spare parts

Spare parts can be ordered from Wilo customer
service. To avoid return queries and incorrect orders,
the serial and/or article number should always be
supplied.
Subject to change without prior notice!
Installation and operating instructions Wilo-Rexa PRO
US English
31